Need help?Do you have a question about the Brother NS-10 and is the answer not in the manual?
General| Buttonhole Styles | 1 |
|---|---|
| Needle Threader | Automatic |
| Maximum Stitch Length | 4 mm |
| Maximum Stitch Width | 5 mm |
| Weight | 5.5 kg |
How to adjust the tension of the upper sewing thread.
Procedure to ensure correct needle positioning for stitch formation.
Adjusting the needle and presser for proper front-to-back alignment.
Setting the correct gap between the needle and the rotary hook.
Adjusting the vertical travel of the needle bar.
Setting the correct height of the needle bar.
Aligning the needle to prevent left/right interference.
Adjusting the needle thread path for proper operation.
Setting the height and parallel alignment of the presser bar.
How to adjust the tension of the lower thread.
Adjusting the fabric feeding mechanism for correct stitch formation.
Adjusting the bobbin winding mechanism for proper winding.
Aligning the feed dog for correct fabric movement.
Setting the vertical height of the feed dog.
Aligning the inner rotary hook bracket for optimal performance.
Troubleshooting steps for when the machine does not power on.
Diagnosing why the main motor fails to operate.
General procedures for interpreting and resolving displayed error codes.
To Next Page
