Brother NS-10 - Feed Mechanism; Removal of Tension Pulley Assy

2 - 27
Feed mechanism
Main unit
Disassembly
1 Removal of Tension pulley assy.
1. Remove the screw 1, and then remove the tension pulley assy. 1 from
the arm bed.
1 1
2 Removal of Lower shaft bushing
1. Remove the screw 1, and then remove the lower shaft bushing 1.
1
1
3 Removal of Inner rotary hook assy.
1. Remove the inner rotary hook assy. 1.
1