Brother NS-10 - Adjustment of Inner rotary hook (lower thread) tension

4 - 16
Adjustment Adjustment of Inner rotary hook (lower thread) tension
1. Set a bobbin (wound with Schappe Spun Sewing Thread thread #60) in the inner rotary hook.
2. Pull the thread with a tension gauge, and adjust the spring adjusting screw so that it is 0.1- 0.12 N (10 - 12 g).
3. Apply a small amout of screw lock agent to the spring adjusting screw.
XA9153001 Tension gauge 30 (0.3 N)