Brother NS-10 - Assembly of Front Cover Assy. (Attachment of SV Key Top)

3 - 37
Main parts
Main unit
3-1 Assembly of Front cover assy. (Attachment of SV key top)
1. Attach the SV key top 1 to the front cover assy.
*Key point
• Check that the hooks 2 (2 locations) of the SV key top 1 is
the upper side and it hang on the front cover assy.
1
2
1
3-2 Assembly of Front cover assy. (Attachment of Buttons)
1. Attach the SS button 1, the reverse button 2 and the NP button 3 to the
font cover assy.
*Key point
• Check that the protrusion of the front cover assy. engaged
with the notch of the each button.
1
3 2
1 2 3