Brother NS-10 - Attachment of Needle Plate B Assy

3 - 40
Main parts
Main unit
Assembly
7 Attachment of Needle plate B assy.
1. Attach the needle plate B assy. 1.
2. Attach the needle plate cover 2 to the needle plate B assy. 1.
1 2
7-1 Assembly of Needle plate B assy.
1. Attach the slide button 1 to the needle plate B assy. 2.
*Key point
• Check that the hooks 3 (2 locations) hang on the needle plate
B assy. 2.
2. Attach the NT lower thread cutter 5 and the spring plate 6 to the cutter
cover 4.
3. Attach the cutter cover 4 to the needle plate B assy. 2.
*Key point
• Check that the hook 7 hang on the needle plate B assy. 2.
3
1 6 4 5
2
1
4
2
27