Brother NS-10 - Attachment of Inlet Assy

3 - 4
Base plate and handle
Main unit
3 Attachment of Inlet assy.
1. Attach the inlet assy. 1 to the base plate with the screw 1.
*Key point
• Check that the boss part of the inlet assy. 1 engaged with the
positioning hole of base plate.
1
Torque
0.78 – 1.18 N·m
1
1
Screw, Pan (S/P washer)
M4X8
4 Attachment of Base plate
1. Attach the base plate 1 to the arm bed with the 3 screws 1.
1
Torque
1.47 – 1.96 N·m
1
1
Taptite, Bind S
M4X10