7 - 5
Special Instructions of Wiring
Special Instructions
of Wiring
Wiring of power module
1. Wiring on front side of insulation cover
2. Wiring on front upper side of insulation cover
Hang the FC lead
wires on the hook.
Pass the FC lead wires between
the ribs (2 locations).
Ferrite cover
Cross the FC lead wires,
and hang it on the hook.
The ferrite core should not go
out of the broken line outside.
Insulation
cover
FC lead wire
Hang the FC lead wire on the hook of the
insulation cover, and send it backward,
and insert it into the cylinder inside, and
pull it to the front side.
Insulation cover
To Next Page
Loading...
