Embroidering
88
j
Edit the pattern position.
• The pattern can be selected with your finger and then
moved by dragging it. Use to select patterns that
are overlapping and cannot be selected by touching
the screen.
• Press to decide the pattern position carefully.
• Press to check the preview of the combined
patterns.
k
Press .
Q Checking the pattern position
The embroidery frame moves and shows the pattern
position. Watch the frame closely to make sure the pattern
will be embroidered in the right place.
a
Press on the embroidery settings screen.
b
From , press the key for the position that you
want to check.
1 Selected position
The carriage will move to the selected position on
the pattern.
c
Press , and then press .
• To see the entire embroidering area, press .
The embroidery frame moves and shows the
embroidery area.
• Make sure the needle is up when the
embroidery frame is moving. If the needle is
down, it could break and result in injury.
To Next Page
Loading...
