How to fix Brother P-touch 1400 Label Maker when printed characters are not formed properly?
If the printed characters from your Brother Label Maker are not formed properly, the batteries may have a low charge. Try using the AC adapter or replace the batteries with new ones.
What to do if my Brother Label Maker does not print clearly?
If your Brother Label Maker does not print or the printed characters are blurred, check that the back cover has been properly attached. Also, if the tape cassette is empty, replace it with a new one.
What to do if my Brother P-touch 1400 is locked up?
If your Brother Label Maker has locked up, meaning nothing happens when you press a key, turn it off. Then, while holding down the 'g' and 'R' keys, turn the machine back on. Note that the machine will restore, but the text and formats shown in the display and all text files stored in the memory will be erased.
Why is the display blank on my Brother Label Maker?
If the display of your Brother Label Maker stays blank after you turn it on, make sure that the AC adapter (model AD-3000/PT) is connected correctly. If you are using batteries, ensure they are correctly inserted. If the batteries are low, replace them with new ones.
Why does striped tape appear on my Brother P-touch 1400 Label Maker?
If striped tape appears when using your Brother Label Maker, you have reached the end of the tape. Replace the tape cassette with a new one.
Why are my stored text files gone from my Brother Label Maker?
If the text files that you stored in the memory of your Brother Label Maker are no longer there, the batteries may be low. Replace them with new ones.
General| Type | Label Maker |
|---|---|
| Print Technology | Thermal Transfer |
| Print Resolution | 180 dpi |
| Display | LCD |
| Display Size | 1 line |
| Keyboard | QWERTY |
| Power Source | AC Adapter or 6 AA Batteries |
| Model | P-touch 1400 |
| Label Width | 6 mm, 9 mm, 12 mm |
| Styles | Normal, Bold, Outline, Shadow |
| Max. Print Height | 12 mm |
Details the P-touch's components and layout, including top and bottom views.
Lists important safety and operational guidelines for using the P-touch.
Information on installing and using batteries and various types of tape cassettes.
Guides users on how to choose between regular and special label modes.
Explains the Normal and Vertical modes for label formatting and printing.
Describes modes for printing labels around cables and wires.
Details the Flag mode for creating wrap-around labels with ends stuck together.
Explains modes for identifying components or panels with specific label layouts.
Covers fundamental operations like navigating menus and confirming choices.
Instructions on entering and editing text, characters, bar codes, and symbols.
Covers adjusting label length, margins, character size, style, and alignment.
Covers previewing layouts, feeding tape, and printing labels.
Advanced printing options like multiple copies and incremental printing.
Managing stored label text and formats in memory for recall and editing.
Specifies how the tape is fed and cut after printing.
How to change the brightness and darkness of the LCD display.
Configures automatic reduction of text size or width to fit labels.
Adjusts the printed label length to match specified settings.
Sets display units to millimeters or inches.
Allows selection of menu and message language.
Shows information about the P-touch software and symbol set versions.
Guides on installing P-touch Editor, printer drivers, and Transfer Manager.
Covers using P-touch Editor for creating templates, entering text, and using databases.
Procedures for downloading templates, databases, and images to the P-touch.
Using Backup Manager to save and restore P-touch data to a computer.
Covers common problems, solutions, and explanations of error messages.
Technical details on hardware and software components of the P-touch.
Lists compatible consumables and optional accessories for the P-touch.
To Next Page