6
Make sure you insert the plug fully into the electrical outlet. DO NOT use an outlet that is loose.
Use only the AC adapter, power cord and USB cable designed exclusively for your P-touch
Label Printer. Failure to do so may result in an injury to yourself or others, or damage to the
P-touch Label Printer or other property. Brother does not assume any responsibility for any
accident or damage resulting from not using the specified AC adapter, power cord and USB
cable.
DO NOT connect the enclosed AC adapter, power cord and USB cable to other products.
DO NOT use the AC adapter in places with high humidity or moisture, such as bathrooms.
DO NOT use a damaged power cord or plug.
DO NOT place heavy objects on, damage, or modify the power cord or plug. DO NOT forcibly
bend or pull the adapter cord.
DO NOT drop, hit, or otherwise damage the AC adapter.
DO NOT touch the AC adapter and the P-touch Label Printer during a thunderstorm.
There may be a remote risk of electrical shock from lightning when the P-touch Label Printer is used
during a thunderstorm.
DO NOT touch the AC adapter, power cord or plug with wet hands, otherwise an electrical shock
may occur.
Cutter
Hazardous moving parts
Keep fingers and other body parts away
DO NOT touch the blade of the tape cutter unit.
WARNING
To Next Page
Loading...
