Need help?Do you have a question about the Brother P-Touch PT-M95 and is the answer not in the manual?
General| Model | PT-M95 |
|---|---|
| Device Category | Label Maker |
| Print Resolution | 203 dpi |
| Print Method | Thermal Transfer |
| Print Speed | 7.5 mm/sec |
| Keyboard Type | QWERTY |
| Cutter Type | Manual |
| Tape Widths | 3.5mm, 6mm, 9mm |
| Tape Type | Non-laminated |
| Display | LCD |
Power on the label maker using AAA batteries.
Select the preferred language for the label maker interface.
Configure the measurement unit for labels (mm or inch).
Toggle between uppercase and lowercase typing modes for text entry.
Input special characters and diacritics using the dedicated table.
Switch to number input mode for entering numerical data.
Create labels with text spread across two lines.
Insert pictographs and symbols using the provided tables.
Print a list of available pictographs and symbols for reference.
Select label functions like size, width, style, and frame types.
Create unique labels using built-in templates and designs.
Preview the entered text before printing the label.
Advance the tape by approximately 25mm for cutting.
Execute the printing process and cut the label.
Print up to 9 copies of the current label.
Use the built-in peeler to remove label backing.
Save and recall original labels to the label maker's memory.
Recall and print previously saved labels from memory.
Access and manage saved labels stored in memory.
Resolve common error messages like Low Battery, Full, No Text, etc.
Find solutions for issues like blank display, printing errors, or settings reset.
To Next Page