Brother P-Touch PT-M95 User Manual

Keyboard
DECO MODE key
Preview key
Print key
Character key
Num Lock key
Shift key
Symbol key
Caps key
Cursor key
Function key
Cursor key
Power key
Backspace key
Enter key
Shift key
Accent key
Space key
Initial Settings
1 Turn on your label maker.
Supply power using four AAA batteries, and then press
to turn the power on.
2 Set the language.
The default setting is [English].
[Language]
[English/Español/Français/
Italiano/Nederlands/Norsk/Português/
Svenska/Türkçe/Dansk/Deutsch]
 You can also display [Language] by pressing and
at the same time.
3 Set the unit of measurement.
The default setting is [mm].
[Unit]
[inch/mm]
 You can also display [Unit] by pressing and .
NOTE
 The label maker automatically turns off if no keys are
pressed within five minutes.
 To cancel operations, press .
 To reset the label maker back to factory settings, see
Resetting the label maker.
LCD
NOTE
The LCD displays one row of 12 characters; however, you can enter up to 80 characters in length.
Width
Bold
Cursor
Num Lock
Caps
Label Length
Frame
Underline
Italic
Vertical
Outline
Shadow
Size
Ke
y
board
LCD
NOTE
Initial Settings
1 Turn on your label m aker.
2 Set the language.
3 Set the unit of measurement .
NOTE

Brother P-Touch PT-M95 Specifications

General

Model	PT-M95
Device Category	Label Maker
Print Resolution	203 dpi
Print Method	Thermal Transfer
Print Speed	7.5 mm/sec
Keyboard Type	QWERTY
Cutter Type	Manual
Tape Widths	3.5mm, 6mm, 9mm
Tape Type	Non-laminated
Display	LCD