Why isn't the thread cutting automatically on my Brother Sewing Machine?
If the thread is not cut during automatic thread cutting on your Brother Sewing Machine, it may be because thread has accumulated around the thread cutting knife. Remove the needle plate and clean away the accumulated thread.
General| Type | Embroidery Machine |
|---|---|
| Embroidery Area | 4" x 4" |
| Built-in Fonts | 5 |
| LCD Display | Yes |
| USB Port | Yes |
| Thread Tension Control | Automatic |
| Maximum Embroidery Speed | 650 stitches per minute |
| Connectivity | USB |
| Needle | Single |
Essential safety rules for machine operation, covering electrical hazards, user safety, and proper use.
Guidance on thread tension adjustment for stitch quality and modifying LCD screen settings.
Procedures for safely changing the needle and checking for bent needles.
Initial steps for starting embroidery, including threading, frame attachment, and pattern selection.
Procedures for addressing thread breaks, incomplete patterns, and other common embroidery challenges.
Explanation of all error messages, warnings, and audio alarms to help diagnose issues.
Solutions for thread issues, stitch problems, mechanical failures, and other operational difficulties.
To Next Page
