Need help?Do you have a question about the Brother PE770 and is the answer not in the manual?
General| AC input voltage | 110 V |
|---|---|
| Power supply type | Electric |
| Display | LCD |
| Interface | USB |
| Control type | Sensor |
| Sewing speed | 650 |
| Product color | Violet, White |
| Buttonhole type | - |
| Number of fonts | 6 |
| Wire cutter included | Yes |
| Sewing machine functions | Embroidery |
| Automatic needle threader | No |
| Number of illumination LEDs | 2 |
| Number of embroidery designs | 136 |
Weight and Dimensions| Depth | 438.9 mm |
|---|---|
| Width | 540 mm |
| Height | 425.9 mm |
Details the primary mechanical systems of the sewing machine.
Explains the mechanical power transmission system of the sewing machine.
Illustrates the locations of key electronic components within the machine.
Presents a schematic of the machine's control system architecture.
Describes the function and operation of various electronic components.
Details the removal and disassembly of the main components of the sewing machine.
Covers the disassembly and removal of electrical components and motors.
Explains the disassembly procedures for the thread tension mechanism.
Details the disassembly steps for the bobbin winder mechanism.
Covers disassembly of rotary hook, feed, bobbin, and cutter mechanisms.
Explains disassembly of needle bar, presser, and upper shaft mechanisms.
Details the disassembly procedures for the needle-presser module.
Covers the disassembly procedures for the feed module.
Explains the disassembly steps for the thread cutter module.
Details the disassembly of components related to the embroidery unit.
Details assembly procedures for needle bar, presser, and upper shaft mechanisms.
Covers assembly of rotary hook, feed, bobbin, and cutter mechanisms.
Explains assembly steps for the bobbin winder mechanism.
Details assembly procedures for the thread tension mechanism.
Covers assembly of electrical components and motors.
Details the assembly of the main structural parts of the sewing machine.
Details the assembly procedures for the needle-presser module.
Covers the assembly procedures for the feed module.
Explains assembly steps for the thread cutter module.
Details the assembly of components related to the embroidery unit.
Covers initial inspection procedures and operation of test modes for adjustments.
Details adjustments for timing belts and motor belt tensions.
Explains how to adjust upper thread, lower thread, and fine thread tensions.
Covers adjustments for needle position, height, and presser foot settings.
Details adjustments for the bobbin winder quantity and embroidery unit positioning.
Lists error messages and guides troubleshooting for power-related failures.
Covers troubleshooting steps for main motor rotation and speed issues.
Guides troubleshooting for thread tension, thread cutter, and bobbin winding issues.
Details troubleshooting steps for embroidery unit operation and component failures.
Covers troubleshooting for touch panel and LCD backlight malfunctions.
Troubleshooting guide for stitch skipping, needle breakage, and seam unevenness.
Addresses problems with power, LCD display, and switch malfunctions.
Troubleshooting for irregular rotation, sewing sounds, and contact noises.
Guides for resolving threading problems and incorrect thread tension.
Troubleshooting for thread cutter and bobbin winder operational failures.
Addresses failures related to the embroidery unit's operation.
Illustrates proper wiring procedures for the needle bar module.
Provides guidance on wiring the rotary hook module.
Details the wiring connections for the motor PCB assembly.
Illustrates wiring procedures for the front cover assembly.
Provides guidance on wiring the embroidery unit assembly.
To Next Page
