Brother PE-200 User Manual (English)

Questions and Answers:

J
Jamie MendozaAug 17, 2025
Why does the upper thread keep breaking on my Brother PE-200?
- V
  Victor MartinezAug 17, 2025
  If the upper thread of your Brother Sewing Machine breaks, it could be due to several reasons. Ensure the upper threading is correct by re-threading it. A tangled upper thread can also cause this, so try cleaning the race or inner rotary hook. Make sure the spool of thread is correctly set and that you are using the proper needle. Finally, if you're using a thread other than the designated upper embroidery thread, replace it with the correct one.
D
Debbie AyersAug 19, 2025
What to do if my Brother PE-200 is skipping stitches?
- T
  Thomas BrownAug 19, 2025
  If your Brother Sewing Machine is skipping stitches, it might be due to a few reasons. First, ensure that the needle is correctly inserted. If not, set the needle properly. Also, check if you are using the correct needle. Make sure the fabric is correctly placed in the embroidery frame, and the embroidery frame is correctly attached to the machine. If you're using thin or stretch fabric, attach stabilizer fabric to provide additional support.
H
Helen KramerAug 22, 2025
What to do if my Brother PE-200 does not start?
- R
  Ryan WarrenAug 22, 2025
  If your Brother Sewing Machine does not start, make sure you press the “START/STOP” button. Check that the main power switch is in the on position. Ensure the presser foot is lowered. You may need to see “ERROR MESSAGE” on page 59.
C
Chad RobinsonAug 25, 2025
Why is the needle breaking on my Brother Sewing Machine?
- J
  John GrossAug 25, 2025
  If the needle of your Brother Sewing Machine breaks, it may be because the needle is not correctly inserted. Remove the needle and reset a new needle properly. Another reason may be that the correct needle is not being used, so change to the proper needle.
A
adamsbrandonAug 27, 2025
Why is the upper thread loose on my Brother Sewing Machine?
- L
  lstoneAug 28, 2025
  If the upper thread is loose on your Brother Sewing Machine, it could be because the upper thread tension is too weak. Increase the upper thread tension using the upper thread tension dial. Another reason could be that the upper or lower thread is not threaded correctly, so ensure they are. Also, check that you're using the designated upper and lower embroidery threads; if not, replace them.
M
Melissa BergerAug 30, 2025
What causes the lower thread to break on my Brother Sewing Machine?
- F
  Felicia NicholsAug 30, 2025
  If the lower thread of your Brother Sewing Machine breaks, it could be due to a tangled upper thread. Try cleaning the race or inner rotary hook. Also, check that the bobbin is threaded properly in the shuttle. Remove the bobbin, reset it correctly, and pull the bobbin thread through the channel. Finally, ensure you are using the designated lower embroidery thread; if not, replace it.
H
hintontonySep 2, 2025
Why is the lower thread visible on the top surface of the fabric with my Brother PE-200?
- L
  Laurie HughesSep 2, 2025
  If you notice the lower thread is visible on the top surface of the fabric when using your Brother Sewing Machine, it could be due to a few reasons. The upper thread tension might be too strong, so decrease it using the upper thread tension dial. Make sure that both the upper and lower threads are threaded correctly. If the thread has been threaded incorrectly through the inner rotary hook, remove the bobbin, reset it properly, and pull the bobbin thread through the channel. Lastly, ensure you are using the designated lower embroidery thread; if not, replace it.
A
Alexander LeeSep 4, 2025
How to prevent fabric puckering with my Brother Sewing Machine?
- B
  Brandon JohnsonSep 5, 2025
  If your Brother Sewing Machine's fabric puckers, it could be due to several reasons. The upper thread tension might be too strong, so decrease it using the upper thread tension dial. Ensure that both the upper and lower threads are threaded correctly. If you're using thin or stretch fabric, attach stabilizer fabric. Also, make sure the fabric is correctly placed in the embroidery frame and that you are using the correct needle.
B
bartlettjakeSep 7, 2025
Why is the embroidered pattern out of shape on my Brother Sewing Machine?
- J
  Jeremy WilsonSep 8, 2025
  If the embroidered pattern on your Brother Sewing Machine is out of shape, it could be due to a few reasons. Check that the fabric has been placed in the embroidery frame correctly and that the embroidery frame has been attached to the machine correctly. If you are using thin or stretch fabric, make sure to attach stabilizer fabric. Ensure that you are using the designated upper and lower embroidery threads. Also, check for and remove any tangled thread inside the rotary hook, and clean the race or inner rotary hook.

Brother PE-200 Specifications

General

Type	Embroidery Machine
Display	LCD
Embroidery Area	100mm x 100mm
Maximum Embroidery Speed	650 spm
Needle	Single

Summary

Important Safety Instructions

Electrical Safety Precautions

Details electrical safety measures and warnings to prevent electric shock.

General Hazard Warnings and Precautions

Outlines warnings for fire, burns, and injury, stressing adult supervision and proper use.

Regional Electrical Safety Guidelines

UK, Eire, Malta, Cyprus Plug and Wiring

Provides specific electrical safety guidelines for users in the UK, Eire, Malta, and Cyprus regarding plugs and wiring.

Before Using Your Machine

Safe Operation and Machine Care

Covers essential safe operation guidelines, tips for longevity, and initial troubleshooting steps.

Machine Knowledge Base

Principal Parts and Their Description

Details the primary parts of the embroidery machine and provides their descriptions.

Machine Power and Connections

Main Power Switch and Connectors

Describes the main power switch operation and the machine's connector ports.

Machine Controls and Operation

Selection Keys and Start/Stop Button

Details the function of selection keys and the Start/Stop button for controlling machine operations.

Included Accessories

Accessory Identification and Part Codes

Provides a comprehensive list of included accessories and their part numbers for reference.

Optional Machine Features

Optional Frames and Memory Cards

Lists optional embroidery frames and memory cards that enhance machine functionality.

Machine Operation Guide

Using the Basic Operation Mode

Guides users through the machine's interactive 'Basic Operation' mode for step-by-step guidance.

Interface Navigation and Operation

Selection Keys and LCD Screen Interaction

Details how selection keys and the LCD screen are used to navigate and perform operations.

Core Embroidery Procedures

Bobbin Winding and Fabric/Needle/Thread Selection

Covers bobbin winding tutorial and guidance on selecting appropriate fabric, needles, and threads.

Language and Display Settings

Changing the Display Language

Guides users on how to change the display language of the machine's interface.

Language Settings Management

Clearing Language Selections

Provides instructions on how to reset or clear the currently selected display language.

Bobbin Winding and Installation

Setting the Thread Spool Correctly

Details the correct procedure for setting the thread spool onto the bobbin winder.

Bobbin Winding Steps

Guiding Thread and Managing Winding

Illustrates thread guiding and explains managing the winding process, including starting and stopping.

Bobbin Installation Procedures

Inserting Bobbin into Shuttle

Details the procedure for inserting the wound bobbin into the shuttle mechanism.

Upper Threading Process

Threading Machine and Using Extra Spool Pin/Net

Covers threading the machine and using an extra spool pin and net for special thread types.

Needle Threading Features

Automatic Needle Threading Device

Explains how to use the automatic needle threading device for quick and easy threading.

Embroidery Preparation

Attaching Stabilizer Material to Fabric

Details how to attach stabilizer material to fabric for improved embroidery quality.

Fabric Preparation Techniques

Handling Different Fabric Types for Embroidery

Provides techniques for preparing different fabric types, including thin and stretch materials, for embroidery.

Embroidery Frame Setup

Setting Fabric in the Embroidery Frame

Guides users on how to properly set and secure fabric within the embroidery frame.

Embroidery Frame Management

Ensuring Correct Fabric Placement in Frame

Provides tips for ensuring the fabric is correctly aligned and securely clamped in the embroidery frame.

Embroidery Frame Handling

Fitting and Removing the Embroidery Frame

Details the procedure for correctly fitting and removing the embroidery frame from the machine.

Thread Tension Adjustment

Adjusting Upper Thread Tension

Explains how to adjust the upper thread tension dial for optimal stitch quality.

LCD Screen Adjustments

Adjusting LCD Brightness and Contrast

Provides instructions on adjusting the LCD screen's brightness and contrast for better visibility.

Needle Maintenance

Changing and Checking the Embroidery Needle

Details changing the needle and checking for bends to ensure proper operation and prevent damage.

Embroidery Process Initiation

Basic Embroidery Threading Setup

Covers the initial threading of the upper thread and spool felt for embroidery.

Starting an Embroidery Project

Preparing Fabric and Attaching Frame

Guides users on how to place fabric in the frame and attach it to the machine.

Executing Embroidery Stitches

Starting and Managing Embroidery Stitches

Details how to start embroidery, manage stitching, and trim excess thread.

Embroidery Tips and Material Guidance

Thread and Needle Recommendations

Offers recommendations for thread types and needle sizes for optimal embroidery.

Pattern Selection Methods

Selecting Built-in Embroidery Patterns

Explains how to select from the machine's library of built-in embroidery patterns.

Character Embroidery Selection

Selecting Alphabetic Characters and Fonts

Details how to select alphabetic characters and choose from different available fonts.

Character Input and Formatting

Switching Between Uppercase and Lowercase Characters

Explains how to switch between uppercase and lowercase character input.

Character Pattern Customization

Adjusting Character Size and Correcting Characters

Covers adjusting character size and correcting entered characters for pattern customization.

Character Input Management

Reviewing Input and Changing Single Colors

Details reviewing character input and setting thread colors for individual characters.

Frame Pattern Creation

Selecting Frame Shapes and Stitches

Guides on selecting frame shapes and stitch types to create custom frame patterns.

Pattern Information Display

Understanding Pattern Data on LCD

Details how pattern information, including time and color, is displayed on the LCD screen.

One-Point Mark Pattern Selection

Selecting One-Point Mark Patterns

Explains how to select specific one-point mark patterns for embroidery.

Pattern Detail Management

Managing Pattern Info and Controls

Details managing pattern information such as color order, position, size, and accessing help.

Embroidery Time and Color Information

Viewing Embroidery Time and Thread Color Names

Provides information on viewing embroidery time estimates and thread color names for selected patterns.

Memory Card Operations

Inserting and Removing Memory Cards

Provides essential instructions for safely inserting and removing embroidery memory cards.

Memory Functionality

Saving Pattern Combinations to Memory

Details the process of saving customized pattern combinations into the machine's memory.

Memory Pattern Retrieval

Recalling Saved Patterns from Memory

Explains how to retrieve previously saved pattern combinations from the machine's memory.

Pattern Setting Adjustments

Adjusting Pattern Position (Layout)

Guides users on how to adjust the embroidery pattern's position on the fabric using the layout function.

Embroidery Placement and Area Check

Fine-Tuning Placement and Tracing Area

Covers fine-tuning pattern placement and using the 'TRIAL' function to trace the embroidery area.

Advanced Pattern Manipulation

Specific Start Points and Pattern Direction

Details setting specific start points and changing pattern direction (rotation) for advanced control.

Mirror Image Pattern Functionality

Horizontally Mirroring Embroidery Patterns

Guides users on how to create a horizontal mirror image of embroidery patterns.

Pattern Size and Density Controls

Resizing Patterns and Adjusting Density

Covers resizing characters/frames and adjusting stitch density for customized patterns.

Basic Embroidery Techniques

Multi-Color and Single-Color Pattern Embroidery

Provides step-by-step instructions for embroidering multi-color and single-color patterns.

Single Color Embroidery Modes

Switching to Single-Color Mode from Multi-Color

Explains how to switch to single-color mode when a multi-color pattern is displayed.

Advanced Embroidery Techniques

Embroidery Across Multiple Frames

Details techniques for embroidering designs that extend beyond the capacity of a single frame.

Embroidery Application Methods

Combining Designs and Creating Badges

Guides on combining designs and creating decorative badges or patches using embroidery.

Embroidery Applique Techniques

Applying Appliques with Frame Patterns

Details how to create fabric appliques using frame patterns and stitches.

Specialty Embroidery Placement

Embroidering Small Pieces or Corners

Provides techniques for embroidering on small fabric pieces or corners, ensuring stability.

Handling Embroidery Interruptions

Responding to Thread Breakages

Outlines the steps to take when the upper or lower thread breaks during embroidery.

Troubleshooting Thread Breakages

Resuming Embroidery After Thread Break

Details how to resume embroidery after a thread break, including re-threading and position adjustment.

Error Recovery Procedures

Restarting Embroidery from the Beginning

Explains how to restart an embroidery pattern from the very beginning after an interruption.

Routine Machine Maintenance

Replacing the Light Bulb

Provides instructions for safely replacing the machine's internal light bulb.

Machine Cleaning Procedures

Cleaning Internal Components (Hook and Race)

Details the process for cleaning internal components like the rotary hook and race for optimal performance.

Error Message Reference Guide

Understanding Warning Message Displays

Lists and explains common warning messages displayed by the machine, with potential causes.

Error Message Explanations

Interpreting Machine Error Codes and Messages

Provides further explanations for various error messages and situations encountered during operation.

Machine Status Alerts

Instructional and Audio Alarm Messages

Covers instructional messages, audio alarms, and their meanings during operation.

Comprehensive Troubleshooting Guide

Resolving Thread and Stitching Problems

Addresses common problems with thread breaks, skipped stitches, and fabric puckering, offering solutions.

Troubleshooting Common Embroidery Issues

Addressing Fabric and Threading Problems

Provides remedies for issues like fabric puckering, incorrect threading, and thread tangling.

Troubleshooting Mechanical Issues

Resolving Machine Operation Problems

Covers troubleshooting for mechanical issues such as slow operation, non-starting, and needle breakage.

Embroidery Pattern Reference Charts

Character Font and Frame Pattern Charts

Provides visual charts for character fonts and frame pattern designs.

Embroidery Pattern Catalog

One-Point Mark Pattern Reference

Lists and illustrates the available one-point mark embroidery patterns.

Using Optional Embroidery Frames

Small Frame Embroidery

Details how to use the optional small embroidery frame for smaller items.

Extra-Small Frame Embroidery

Explains how to use the optional extra-small embroidery frame for delicate or small items.

Large Frame Embroidery

Provides instructions for using the optional large embroidery frame for larger designs.