Brother PE-600II User Manual (English)

Other manuals for Brother PE-600II

Questions and Answers:

P
phillipsmarkAug 17, 2025
Why is my Brother Sewing Machine needle breaking?
- R
  Rebecca SchultzAug 17, 2025
  If your Brother Sewing Machine's needle is breaking, make sure the needle is correctly installed and the needle set screw is securely tightened using the Allen screw driver. A bent or blunt needle should be replaced. If the area around the hole in the needle plate is damaged, or if the needle hits the needle plate, consult your nearest authorized dealer. Also, consult your nearest authorized dealer if the presser foot is set too high and not correctly positioned, causing the needle to hit the presser foot.
N
Nancy GarrettAug 19, 2025
What to do if my Brother PE-600II is skipping stitches?
- E
  erogersAug 20, 2025
  If your Brother Sewing Machine is skipping stitches, make sure the upper thread is threaded correctly and that the needle is not bent or blunt; replace it if necessary. Ensure the needle is correctly installed. Clean any dust from under the needle plate or in the hook. If the needle and hook are not correctly passing each other, consult your nearest authorized dealer. If the thread twist is either too tight or too loose, try using a new spool.
R
Rebecca BerryAug 22, 2025
Why is my Brother PE-600II Sewing Machine so noisy?
- A
  Amanda HoodAug 22, 2025
  If the Brother Sewing Machine is noisy, clean the hook if lint is wound in it. Check the thread path and re-thread the upper thread. Oil the recommended parts.
G
Gary DavidsonAug 25, 2025
Why does the upper thread keep breaking on my Brother PE-600II?
- A
  Amanda TrujilloAug 26, 2025
  If the upper thread of your Brother Sewing Machine breaks, ensure the needle is correctly installed and the needle set screw is tightened with the Allen screw driver. Replace bent or blunt needles. If the needle plate is damaged, replace it, or consult your nearest authorized dealer. Also, consult your nearest authorized dealer if the needle is touching the needle plate or if the presser foot is set too high. If you're using a weak thread, like a metallic thread, slow down the machine's sewing speed.
A
Alexis ReeseAug 28, 2025
Why is the bobbin thread breaking on my Brother PE-600II Sewing Machine?
- J
  Jessica Reed MDAug 28, 2025
  If the bobbin thread breaks in your Brother Sewing Machine, make sure it's correctly threaded. Replace the bobbin if it's scratched or doesn't rotate smoothly, and replace the bobbin case if it's damaged. Remove any tangled thread and clean the hook. Ensure you are using the correct bobbin designed specifically for your machine.
S
Samuel AguirreAug 30, 2025
How to fix loops in the upper thread on my Brother Sewing Machine?
- J
  Jade SnowAug 30, 2025
  If you see loops in the upper thread of your Brother Sewing Machine, the upper thread tension may be low. After passing the upper thread through the hole in the presser foot, pull the thread by hand to check the thread tension. If it is difficult to determine, compare it with other needle bars where looping does not occur. Alternatively, the thread quality may be poor, so try sewing with different thread. If the problem no longer occurs after the thread is changed, replace the thread with one of good quality.
L
Lindsay MyersSep 2, 2025
What causes the embroidery pattern to be misaligned on my Brother PE-600II Sewing Machine?
- W
  wufeliciaSep 2, 2025
  If the embroidery pattern is misaligned on your Brother Sewing Machine, use tweezers to remove any tangled thread from the hook. Ensure the fabric is taut and correctly framed in the embroidery frame. Use an embroidery frame that matches the size of the embroidery.
J
Jason AllenSep 5, 2025
Why does my Brother PE-600II make needle cuts or holes in the garment?
- N
  Nancy TrujilloSep 5, 2025
  If there are needle cuts or holes in the garment when using your Brother Sewing Machine, replace the needle. Dull needles have a difficult time passing through the garment, causing fabrics to tear.
A
Angela ColeSep 7, 2025
What to do if the upper thread doesn't reach the bobbin thread on my Brother PE-600II Sewing Machine?
- S
  Sarah PalmerSep 8, 2025
  If the upper thread does not reach the bobbin thread when embroidering begins with your Brother Sewing Machine, correctly thread the lower thread.