Brother PE-DESIGN PLUS - Changing Application Settings

57
Arranging Embroidery Designs
Arranging Embroidery Designs
Changing Application Settings
Changing the grid settings
A grid of dotted lines or solid lines can be displayed
or hidden, and the spacing for the grid can be
adjusted.
1. Click .
2. Specify the grid settings.
Show Grid:
Select this check box to display the grid.
Snap to Grid:
Select this check box to align patterns
with the grid.
Interval:
Specify the grid spacing.
System unit
Click / to switch the measurement units
between millimeters and inches.
b Memo:
The snap feature works whether or not the
grid is displayed.
b Memo:
The system units can also be changed with
the following operation.
Click 1 , then 2 .
Click
System Unit , and then select the
desired measurement units (
mm or inch ).
1
2
XE8656-001.book Page 57 Thursday, June 30, 2011 2:56 PM