What to do if my Brother PQ1500SL Sewing Machine doesn’t run?
If your Brother Sewing Machine doesn't run, start by ensuring the power is turned on and the machine is properly plugged into a power outlet. Also, check if the foot controller is securely attached. If these steps don't solve the issue, the machine might need to be cleaned and oiled.
Why is the fabric not feeding properly on my Brother PQ1500SL?
If your Brother Sewing Machine's fabric isn’t feeding correctly or you're getting irregular stitches, try re-threading the machine. Ensure you're using the correct needle for your fabric and thread. Also, check the bobbin tension; if it's too high, reduce it. Finally, inspect the bobbin case for scratches and clean it if necessary.
How to fix a noisy Brother PQ1500SL Sewing Machine?
If your Brother Sewing Machine is making unusual noises, start by cleaning the feed dog and bobbin case to remove any lint or debris. Ensure the needle is fully raised by turning the hand wheel. If the noise persists, the machine may need oiling.
What to do if the automatic needle threader on my Brother PQ1500SL doesn't work?
If the automatic needle threader on your Brother Sewing Machine isn't working, begin by re-threading the machine to ensure it's done correctly. Check the needle for any bends or dullness and replace it if needed. Also, inspect the needle threader hook to make sure it isn't bent and properly aligns with the needle eye.
General| Maximum Sewing Speed | 1, 500 stitches per minute |
|---|---|
| Automatic Needle Threader | Yes |
| Knee Lifter | Yes |
| Extension Table | Included |
| Thread Tension Control | Manual |
| Needle Positions | Variable |
| Built-in Free Arm | No |
| Weight | 24.2 lbs |
| Feed Dog | 7 points |
| Needle Position | Variable |
| Stitch Options | Straight stitch |
| Stitch Length | 5mm |
| Included Accessories | extension table, knee lifter |
Warnings to reduce the risk of electric shock.
Warnings to reduce risks of burns, fire, shock, or injury.
Specific caution for USA users regarding polarized plugs.
Critical warning about connecting to the earth terminal.
Guidelines for safe operation of the sewing machine.
Adjusting pressure for different fabric types.
Detailed instructions for winding a bobbin.
How to correctly insert the bobbin into the machine.
Detailed instructions for threading the upper thread path.
Step-by-step guide to using the automatic needle threader.
How to adjust thread tension for different fabrics.
Solutions for upper and bobbin thread breakage.
Causes and fixes for skipped or irregular stitches.
How to resolve problems with fabric not feeding correctly.
Solutions for seam puckering or loop formation.
Reasons for needle breakage and machine failure to operate.
Troubleshooting the automatic needle threader and thread cutter.
To Next Page
