S
Shane VegaSep 14, 2025
What to do if security settings are incorrect on Brother Label Maker?
- DDr. Jeremy Hansen Jr.Sep 14, 2025
Recheck and select the correct security settings.
To Next PageTo Next PageWhat to do if security settings are incorrect on Brother Label Maker?
Recheck and select the correct security settings.
Why is my Brother Label Maker not printing?
First, verify that you've entered text and that the tape cassette is correctly installed with sufficient tape. If the tape is bent, cut off the bent section and thread the tape through the exit slot or tape guides. If printing from a computer or mobile device, ensure it's correctly connected to the Brother Label Maker.
How to fix Brother PT-D800W Label Maker printing issues?
If your Brother Label Maker is not printing correctly, remove the tape cassette and reinstall it, pressing firmly until it locks. If the print head is dirty, clean it with a dry cotton swab or optional print head cleaning cassette (TZe-CL6). If the print quality is still poor, wipe the label roller with a dry cotton swab.
How to fix a tape jam in my Brother PT-D800W?
If the tape is jammed in your Brother Label Maker, first remove the tape cassette. Inspect the tape cassette compartment and tape exit slot for any tape scraps, jammed tape, or debris that might be blocking the tape's path, and remove them. Examine the tape cassette itself, and cut away any damaged tape past the tape guides. Ensure the end of the tape isn't bent and passes through the tape guides before reinserting the cassette.
Why is my Brother Label Maker not cutting automatically?
Check the Cut Option setting on your Brother Label Maker.
How to check Brother PT-D800W firmware version?
The version number and other information for the firmware can be confirmed using the following procedure: Select [Settings] in the Home screen using the,, or key, and then press the OK or Enter key.
How to fix FLe label positioning on Brother Label Maker?
If FLe labels are not positioned correctly on your Brother Label Maker, wipe the FLe sensor using a cotton swab moistened with alcohol to clean the sensor.
Why does my Brother PT-D800W Label Maker jam with TZe-R*** tape?
Remove the TZe-R*** tape cassette from the Brother Label Maker, and then remove the jammed ribbon. Because the material used for the TZe-R*** ribbon is light and flexible, the ribbon may jam if it contacts the parts of the Tape Exit Slot.
What to do if ink ribbon separated in Brother PT-D800W Label Maker?
If the ink ribbon is broken in your Brother Label Maker, replace the tape cassette. If the ribbon isn't broken, leave the tape uncut, remove the tape cassette, and wind the loose ink ribbon onto the spool.
How to find the firmware version on my Brother PT-D800W?
To find the firmware version on your Brother Label Maker: 1. Select [Settings] in the Home screen. 2. Select [Version Information]. Alternatively: 1. Turn your P-touch labeling system on. 2. Press and hold the (Feed and Cut) button for more than 10 seconds to print the report. (Use 24 mm or 36 mm tape.)
General| Brand | Brother |
|---|---|
| Model | PT-D800W |
| Category | Label Maker |
| Language | English |
