Which printing modes are available?
The following modes are available for selecting when the printing starts.
Immediately after starting to receive data
Printing starts immediately after the printer begins receiving the printing data.
This is the default mode.
If the printing data for the next page is received before the printer finishes printing the current page, the printer will print continuously without stopping.
After one page of data is received
Printing starts after the printing data for one page is received.
When After one page of data is received is selected, the printer will not stop during the printing of a page even if your computer is performing complex operations at the same time that are
not related to printing.
To switch between the two modes above, follow the steps below:
1. Start P-touch Editor and select Print from the File menu.
2. Click Properties in the Print dialog box.
3. In the Other tab, select Immediately after starting to receive data or After one page of data is received for Start printing and click OK.
© 2001-2020 Brother Industries, Ltd. All Rights Reserved.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
To Next Page
Loading...
