What to do if Brother Printer has a transmission error?
If your Brother label printer has a transmission error, try the following: * Restart the label printer. * If using a mobile device, establish a Bluetooth connection. * If using a computer, reconnect the USB cable or change the USB port.
How to fix insufficient charge on Brother P-touch Embellish ELITE PT-P715eBT?
To address an insufficient charge issue on your Brother label printer: * Restart the label printer. * Ensure you've removed the protective sheet and then charge the battery.
What to do if Brother P-touch Embellish ELITE PT-P715eBT program transfer failed?
If you experience a program transfer failure with your Brother printer, attempt to transfer the program again. If the problem persists, there is no solution.
What to do if Brother P-touch Embellish ELITE PT-P715eBT shows a cutter error?
If your Brother label printer displays a cutter error, restart the printer.
How to resolve Ribbon Tape Cassette installed error on Brother P-touch Embellish ELITE PT-P715eBT?
To resolve a Ribbon Tape Cassette installation error on your Brother printer: * Lightly press the Power Button. * Insert the correct Ribbon/ Tape Cassette.
What to do for battery failure on Brother P-touch Embellish ELITE PT-P715eBT Printer?
If you are experiencing battery failure with your Brother Printer: * Lightly press the Power Button. * If the problem is still not resolved, replace the battery.
General| Model | PT-P715eBT |
|---|---|
| Type | Label Printer |
| Technology | Thermal Transfer |
| Connectivity | Bluetooth, USB |
| Print Width | 24 mm |
| Print Speed | Up to 20 mm/sec |
| Tape Sizes | 3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm |
| Mobile Device Compatibility | iOS, Android |
| Cutter | Automatic |
| Label Length Range | Up to 1 meter |
| Label Types | Iron-on, Specialty |
| Supported Label Tapes | Brother TZe tapes |
| Power Source | AC adapter |
| Battery | Lithium-ion |
| Display | No |
| Compatibility | Windows, Mac |
Guidelines to avoid heat generation, smoking, explosion, fire, or injury.
Precautions for label printer, tape cassette, and USB cable usage.
Identifies the key components of the label printer.
Step-by-step guide on how to install the tape cassette.
Instructions on how to charge the rechargeable battery.
Procedures for removing and disposing of the battery.
How to power the label printer on and off.
Steps to connect the printer to a mobile device via Bluetooth.
How to create labels using the P-touch Editor software on Windows.
Adjusting printer settings using the dedicated tool on Windows.
Method to copy settings to multiple printers on Windows.
Process for updating the printer's software on Windows.
Procedure for updating the printer's firmware on Windows.
How to create labels using the P-touch Editor software on Mac.
Adjusting printer settings using the dedicated tool on Mac.
Method to copy settings to multiple printers on Mac.
Procedure for updating the printer's firmware on Mac.
Procedures for maintaining the label printer's condition.
How to clean the outer surfaces of the label printer.
Steps to clean the print head for better label quality.
How to clean the tape cutter blade to prevent jams.
Information to help diagnose and resolve issues.
Explains the meaning of different LED light indicators.
Solutions for problems indicated by LED lights.
Technical details and specifications of the label printer.
List of registered trademarks and copyrights.
To Next Page
