To Next Page
M
Michael BoltonAug 15, 2025
Why does striped tape appears in Brother P-touch 1750?
- RRobert JohnsonAug 15, 2025
Striped tape appears because you have reached the end of the tape. Replace the tape cassette with a new one.
Why does striped tape appears in Brother P-touch 1750?
Striped tape appears because you have reached the end of the tape. Replace the tape cassette with a new one.
Why Brother P-touch 1750 Printer does not print or printed characters are blurred?
If your Brother Printer is not printing or the printed characters are blurred, check that the tape cassette has been inserted properly. If the tape cassette is empty, replace it with a new one. Also, make sure that the tape compartment cover has been closed.
What to do if Brother Printer display stays blank?
If the Brother Printer display remains blank after turning it on, ensure the AC adapter is correctly connected. If using batteries, verify they are properly inserted and replace them if they are low.
Why is my Brother Printer not printing properly?
If your Brother Printer is not printing or the printed characters are blurred, check that the tape cassette has been inserted properly and is not empty. Also, ensure that the tape compartment cover is closed.
How to fix Brother P-touch 1750 characters not formed properly?
If the printed characters on your Brother Printer are not formed properly, the batteries may be low. Try using the AC adapter or replace the batteries with new ones.
What to do if Brother P-touch 1750 Printer has locked up?
If your Brother Printer has locked up, turn off the machine. Then, while holding down the f and R keys, press the b key to turn the machine back on. Finally, release the f and R keys.
What to do if text files are no longer in Brother P-touch 1750 memory?
If the text files stored in your Brother Printer's memory are no longer there, replace the batteries with new ones, as low batteries can cause data loss.
Why are printed characters not formed properly on Brother P-touch 1750?
If the printed characters are not formed properly on your Brother Printer, it may be because the batteries are low. Try using the AC adapter or replace the batteries with new ones.
What to do if Brother P-touch 1750 Printer is locked up?
If your Brother Printer has locked up, meaning nothing happens when you press a key even though the machine is on, turn off the machine. Then, while holding down the 'f' and 'R' keys, press the 'b' key to turn the machine back on. Finally, release 'f' and 'R'. Note that this will erase the text and formats in the display and all text files stored in the memory.
General| Device Type | Label printer |
|---|---|
| Print Technology | Thermal Transfer |
| Maximum Resolution (B&W) | 180 dpi |
| Maximum Print Speed (B&W) | 10 mm/sec |
| Keyboard | QWERTY |
| Font Sizes | Small, Medium, Large |
| Number of Font Styles | 9 |
| Tape Width | 6 mm, 9 mm, 12 mm |
| Display | LCD |
| Power | optional AC adapter |
| Weight | 0.35 kg |
| Max. Label Length | 300 mm |
| Built-in Symbols | Yes |
Provides a top and bottom view of the P-touch 1750, labeling its parts.
Lists important safety warnings and precautions for using the P-touch 1750.
Explains how to install and change the six AA batteries for the machine.
Describes how to change the TZ tape cassette and prepare it for use.
Explains how to clean the print head and rollers to ensure label quality.
Describes how to adjust the character size for printing labels, with different size options.
Describes how to store, recall, and delete text files in the machine's memory.
Provides common problems and their corresponding remedies for the P-touch 1750.
Lists potential error messages, their causes, and recommended solutions.
