8
Download the P-touch application from the App Store or Google Play™.
3
Print from Your Mobile Device
P-touch Design&Print Design and create stylish labels for work or home.
• When using TZe-R*** ribbon, press Print, and then select Special Tape in Cut Options.
• Glue from previous labels may stick to the cutter, causing uneven cuts in the satin ribbon.
• We recommend cutting the ribbon manually.
• When using tape labels, after the last label prints, press the Power Button twice quickly to eject and cut the last
label. Note that the label printer will feed about 1 in./25 mm of leader tape before the next new label when you
use this method.
• Due to the structure of the laminate, when Auto Cut is ON, the label printer feeds approximately 1 in./25 mm of
leader tape before every new label.
• To save ribbon/tape, change these settings in the app:
P-touch Design&Print - Turn Cut the last label: OFF
Then print your labels and leave the last label in the label printer until you are ready to print a new label.
To Next Page
Loading...
Need help?
General