Set Up Your Label Printer
5
Charge the Battery 2
a Remove the protective sheet (first time only).
b
Connect the label printer to the computer using the included USB cable, or connect the USB cable to a USB AC
Adapter (not included) suitable for charging mobile devices, and plug the adapter into a power source. Charge
until the Battery LED turns off.
• Use the included USB cable.
• If charging the battery using a computer, make sure the computer is on.
Notes on Using the Rechargeable Li-ion Battery
• Charge the battery in environments between 50 °F and 95 °F/10 °C and 35 °C, otherwise the battery will not
charge, and the Battery LED will remain lit.
• If the label printer is used to print, feed, or perform another operation while charging, charging may stop even
though the battery is not fully charged. Charging resumes when the operation is completed.
Rechargeable Li-ion Battery Characteristics
To ensure the highest performance and longest life from the Rechargeable Li-ion Battery, when storing the label
printer for a long period of time:
• Charge once every six months.
• Store in a cool dry place out of direct sunlight, between 50 °F and 95 °F/10 °C and 35 °C.
USB AC Adapter
(not included)
5 V DC, 0.5 A – 2 A
USB Port
(on computer)
5 V DC, 0.5 A – 2 A
To Next Page
Loading...
