Print from Your Computer
11
Windows 4
Create Ribbon/Labels with P-touch Editor 4
a Connect the label printer and your computer with the included USB cable.
b Double-click the P-touch Editor icon on the desktop.
c Create a new layout or open an existing layout.
d Select the mode as necessary:
Mode Features
Print Settings
Change
How to Print
Express
This mode allows you to quickly create
layouts that include text and images.
Yes Click the print icon > Print
Yes File menu > Print > Print
Professional
This mode allows you to create layouts
using a wide-range of advanced tools
and options.
No Click the print icon
Yes File menu > Print > Print
Yes Click the print icon > Print
Snap
This mode allows you to create custom
layouts at any time by keeping the
P-touch Snap palette displayed on your
monitor.
• Screen Capture function
• Drag-and-Drop function
• Print Text function
No
Click the print icon
Options Functions (Multiple selection is possible for some options)
Auto Cut Cuts each label automatically.
Chain Printing Allows you to save tape by not cutting the last label.
Special Tape
Feeds tape for manual cutting. Use for special tapes, such as Ribbon, Fabric Tapes
and Extra Strength Adhesive Tapes.
Mirror Printing Print reverse.
• When using Special Tapes, such as ribbon, press Print and then select Special Tape in Cut Options.
• Glue from previous labels may stick to the cutter, causing uneven cuts in the satin ribbon.
• We recommend cutting the ribbon manually.
• When using tape labels, after the last label is printed, press the Power Button twice quickly to feed and cut the tape.
• Before each initial print, the label printer feeds an approximately 25 mm (1 in.) of blank tape.
•The Cable Labeling Wizard allows you to create layouts for electrical equipment management.
• This label printer does not support Bluetooth connections for computers.
• This label printer does not support Wi-Fi connections.
To select the layout:
- Double-click the layout icon.
- Select the layout icon, then click the arrow mark .
To change the P-touch Editor startup settings:
a Click the Tools menu, and select > Options.
b In the Options window, select General and select the startup setting you want from Operations.
To Next Page
Loading...
Need help?
General