Print from Your Computer
15
Apply Settings Changes to Multiple Label Printers 4
a After applying settings to the first label printer, disconnect the label printer from the computer.
b Connect the second label printer to the computer.
c Select the newly connected label printer from the Printer drop-down list.
d Click Apply Settings to the Printer.
Repeat steps a to d for all label printers whose settings you want to change.
Update Firmware 4
a Turn on the label printer, and connect it to your computer with the included USB cable.
b Click Macintosh HD > Applications > P-touch Update Software.
c Click Machine update.
d Select the Printer, ensure that The machine is connected correctly. appears, and then click OK.
e Select the Language, select the check boxes next to the firmware you want to update to, and then
click Transfer.
f Click Start.
• To save the current settings in a file, click Export.
• The same settings can be applied to other label printers. Click Import, then select the exported file.
• Do not power off or disconnect the USB cable while updating.
• Close all other Brother applications.
To Next Page
Loading...
Need help?
General