Creating a label using P-touch Editor Lite
To create a label using P-touch Editor Lite, follow the steps below:
1. Turn on the P-touch labeler (1), then press and hold down the Editor Lite button until the green Editor Lite lamp lights up (2).
2. Connect the USB cable to the computer and P-touch labeler.
If you are connecting the P-touch labeler via a USB hub, it may not be detected correctly.
3. When the printer is connected to your computer, the following windows open.
For Windows 8 or later:
Double-click "PTLITExx.EXE (xx=Version)" to start P-touch Editor Lite.
For Windows 7:
Click [Open folder to view files].
The following window opens.
Double-click "PTLITExx.EXE (xx=Version)" to start P-touch Editor Lite.
To Next Page
Loading...
