Information to be displayed in the dialog box from step 4 can be entered in the Notes text box.
B. If multiple printers have been selected
In the dialog box from step 4, select the printers whose setting are to be specified, and right-click them and click Settings. From the Set Width drop-down list, select the tape width. The same tape width
setting is applied to all selected printers.
The settings below Printer Settings and Notes are not available.
6. Click OK to close the tape width setting window.
7. Click OK to close the Distributed Printing Settings window.
Setup is completed.
8. Click OK to start distributed printing.
It may not be possible for information to be detected for a printer connected using the any common USB hub or print server.
Before printing, enter the settings manually, and check if the printer can be used for printing.
Depending on whether a router is used and the security features in use, such as a firewall, it may not be possible to use this function.
We recommend performing a connection test for your operating environment. For more information, contact a sales representative.
© 2001-2020 Brother Industries, Ltd. All Rights Reserved.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
To Next Page
Loading...
