How to use the Numbering function (P-touch Editor 5.x for Windows)
The numbering function is used to make a series of sequential alpha/numeric labels.
The following steps show how to create sample labels below using Express mode.
1. Click .
Type "File 001" and highlight "001".
You can insert a space instead of "0", such as "__1". If you do not want to leave any space, we recommend creating labels separately for 1-digit, 2-digit and 3-digit numbers.
2. Select [Format] - [Numbering].
The NUM icon will appear.
3. Click to display the print dialog box.
Make sure that the "Numbering:" check box is checked. Specify the number of labels to be printed in the "Count:" box and then click [Print].
To Next Page
Loading...
