Windows 7:
In the [Find a printer by name or TCP/IP address] dialog box, select [Add a printer using a TCP/IP address or hostname], and then click [Next].
Windows 8 or later Windows 7
12. Enter the IP address you confirmed in step 9, and then click [Next].
13. When the [Which version of the driver do you want to use?] dialog box appears, select [Use the driver that is currently installed (recommended)], and then click [Next].
14. Confirm the printer name, and then click [Next]. You have finished connecting your computer to the printer.
15. Open the [Devices and Printers] window again, right-click your printer's icon, and then click [Printer Properties].
16. In the [Ports] tab, confirm that:
a) The printer's IP address is the same as the address you confirmed in step 8.
b) The [Standard TCP/IP Port] option is selected (not the WSD port).
Click [Apply].
17. Make sure that the Editor Lite LED is off. Start the P-touch Editor and select the printer from the list.
18. You can now edit and print labels wirelessly from your computer.
For Mac (macOS 10.15 or earlier):
1. Download the Full Software Package from the [Downloads] section of this website.
2. Double-click the downloaded file, and then start the installer from [Start Here OSX].
3. In the [Connection Type] dialog box, select [Local Connection (USB)] and follow the on-screen instructions.
4. When the installation is finished, press and hold the printer's Wireless Mode button for one second to turn on the wireless mode. When the Wi-Fi LED is lit, release the Wireless Mode button.
Make sure that the P-touch Utility is installed on your computer. If it is not, download it from the [Downloads] section of this website.
To Next Page
Loading...
