13. Confirm the printer you connected with Ad-hoc mode in step 8 is selected, and then click [Next].
Check the displayed settings and then click [Next] to add the printer.
14. Confirm that the Editor Lite LED is off. Start the P-touch Editor and select the printer from the drop-down list.
15. You can now edit and print labels wirelessly from your computer.
[ Back To Top ]
Mac
1. Download the Full Software Package from the [Downloads] section of this website, double-click the file, and then start the installer from [Start Here Mac].
2. In the [Connection Type] dialog box, select [Local Connection (USB)] and follow the on-screen instructions.
3. When the [Wireless Device Setup] dialog box is displayed, select [Yes, I have a USB cable to use for installation.].
If this dialog box does not appear, start the [Wireless Device Setup Wizard] from the [Utilities] folder.
To Next Page
Loading...
