Brother RJ-3150 - Network Configuration; Resetting Network Settings

How do I reset network setting?
Follow the instructions below:
For RJ-3050/3050Ai
1. Press and hold the (Power) button to turn the printer off.
2. Press and hold the (Feed) button and the (Power) button for about 3 seconds. The POWER, Wi-Fi® and Bluetooth
®
indicators start blinking (POWER: in orange; Wi-Fi and Bluetooth: in blue).
3. While pressing the (Power) button, press the (Feed) button once.
4. Release the (Power) button.
For RJ-3150/3150Ai
1. Press the Menu, Up or Down arrow button to select the Administration menu, and then press the OK button.
2. Select Reset > Network Reset > Reset using the Up or Down arrow button, and then press the OK button.
© 2001-2019 Brother Industries, Ltd. All Rights Reserved.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
RJ-3150
Go to Index
Go to Index
108 / 237