UsingPtouchTemplateSettings
PtouchTemplatemodeprovidesfunctionsforinsertingdatafromadevice(suchasabarcodereaderconnectedtotheprinter)intotextandbarcodeobjectsinlayoutssavedontheprinter,usefulforprinting
templatesandbarcodes.
FormoreinformationonPtouchTemplate,downloadthePtouchTemplateManual/CommandReference(Englishonly)fromthe[Manuals]page.
TousethePtouchTemplateSettings,pleasefollowthestepsbelow:
1. OpenthePrinterSettingTool.
RefertotheFAQ:"UsingthePrinterSettingTool(forWindows)"
2. SelectPtouchTemplateSettings.
ThePtouchTemplateSettingsdialogboxappears.
3. Specifyorchangethesettings.
Seebelowfordetailedinformation.
PtouchTemplateSettingsDialogBox
1. DefaultCommandMode
InordertousePtouchTemplates,selectthe[PtouchTemplate]mode.
Availablesettings:[PtouchTemplate],[ESC/P],[Raster]
2. DefaultTemplateNumber
Specifythetemplatenumberselectedasthedefaultwhentheprinteristurnedon.
However,ifanytemplatehasbeensettonotbetransferredtotheprinter,thenumberofthattemplatecannotbespecified.
3. DataDelimiterforPtouchTemplate
Adelimiteristhesymbolusedtoindicatewhentomovetothenextobjectinthedatathatisbeingsent.
Between1and20characterscanbespecified.
4. TriggerforPtouchTemplatePrinting
Selectoneofthefollowingthreeoptionsfortheprintstarttrigger.
[CommandCharacter]:Printingstartswhenthecommandcharacterspecifiedhereisreceived.
[DataInsertionintoAlltheObjects]:Printingstartswhenthedelimiterforthelastobjectisreceived.
[ReceivedDataSize]:Printingstartswhenthenumberofcharactersspecifiedhereisreceived.However,delimitersarenotcountedinthenumberofcharacters.
5. CharacterCodeTable
Selectoneofthefollowingthreecharactercodesets.
Availablesettings:[Windows1252],[Windows1250EasternEurope],[Brotherstandard]