How do I create a label containing a bar code/QR code? (P-touch Editor 5.x for Windows)
Follow the steps below:
1. Express mode:
Click [Insert] - [Bar Code...].
Professional mode:
Click the [Bar Code] icon in the side bar.
2. The [Bar Code Properties] dialog box will appear. If necessary, change the protocol and settings from the [Protocol] tab and the [Setup] tab.
Select "QR Code" or "Micro QR Code" in the [Protocol] tab to create a QR code.
3. Click the [Input] tab. Type the bar code data in the [Data:] edit box, and then click [OK].
To Next Page
Loading...
