How do I transfer label templates to the printer via network? (BRAdmin Professional)
To transfer the templates to the printer via network, download and install BRAdmin Professional from the [Downloads] section of this website.
The following screens may differ depending on the model.
1. Create the template you want to transfer with P-touch Editor, then choose [File] - [Transfer Template...] menu to register. Transfer Manager will start up.
2. In Transfer Manager, click , or choose [File] - [Save Transfer File] menu to save the registered template in .blf format.
3. Start BRAdmin Professional.
Choose the printer from the list and click on the [Control] menu. Select [Load Firmware (Manual)].
4. Choose [TFTP PUT] and click [OK].
5. Enter the password and choose the .blf file which you saved in step 2, then click [OK].
The default user ID and login password to manage printer settings is one of the following combinations:
Combination ID Password
1 - -
2 admin access
3 - initpass
4 - The password preceded by "Pwd" and located either on the bottom of the printer or in the battery or media compartment.
For more information, see [IMPORTANT – Network Security Notice: Default Login Password Change] on the [Manuals] section.
Related FAQs
How do I transfer label templates with P-touch Transfer Express?
How do I transfer templates or other data from the computer to the printer? (P-touch Transfer Manager)
How do I transfer label or slip templates?
To Next Page
Loading...
