Brother RJ-4030 User Manual (English)

Other manuals for Brother RJ-4030

User Guide63 pages

Software Manual108 pages

Questions and Answers:

M
marie79Aug 17, 2025
Why does my Brother Printer not print or show a printing error?
- H
  Harry OrtizAug 17, 2025
  If your Brother Printer isn't printing or shows a printing error, try these steps: * Ensure the cable is securely connected. * Remove and reinstall the RD Roll. * Install a new RD Roll. * Check that the RD Roll compartment cover is closed. * Move the roll guide against the side of the RD Roll. If the problem persists, turn the printer off and on again. If it still doesn't work, contact your Brother dealer.
S
Shannon HoffmanAug 20, 2025
How to reset Brother Printer and delete transferred data?
- D
  destinysotoAug 20, 2025
  To reset your Brother printer and delete the data transferred from the computer, follow these steps: 1. Turn the printer off by pressing and holding the Power button. 2. Press and hold the Feed button and the Power button until the POWER, STATUS, and BATTERY indicators start blinking in orange. 3. While still pressing the Power button, press the Feed button 3 times. 4. Release both the Power and Feed buttons simultaneously. This will delete all transferred data from the computer and reset the printer to factory settings.
A
Angela CruzAug 22, 2025
Why is the print quality poor on my Brother Printer?
- D
  Dr. Dawn Mendoza MDAug 23, 2025
  If the print quality is poor on your Brother printer, the roller may be dirty. Clean the roller.
J
joshua03Aug 26, 2025
Why do printed labels contain streaks on Brother Printer?
- R
  Robert BryantAug 26, 2025
  If printed labels contain streaks or poor-quality characters, or if labels are not fed correctly on your Brother printer, the roller may be dirty. Clean the roller.
L
Lisa WilcoxAug 28, 2025
What to do if labels are jammed on Brother Printer?
- A
  Amanda VasquezAug 28, 2025
  If labels are jammed or not ejected correctly after printing, consider the following: * Ensure the ejection path of the label is not blocked. * Remove and reinstall the RD Roll to ensure it is set correctly. * Make sure that the RD Roll compartment cover is closed correctly.
N
ncarrilloAug 31, 2025
What to do if Brother Printer POWER indicator is not lit?
- K
  Kenneth FaulknerAug 31, 2025
  If the POWER indicator on your Brother printer is not lit, try the following: * Check that the power cord is inserted correctly. * Try plugging the printer into another electrical socket. If the issue continues, contact your Brother dealer.
S
sandra10Sep 3, 2025
Why do I get data transmission error on my Brother Printer?
- Z
  Zachary NicholsonSep 3, 2025
  If a data transmission error appears on your computer when using your Brother printer, try these steps: * Check that the correct port is selected. * Wait until the indicator stops flashing, and then try printing again. * Execute the print job again after the other jobs are completed.
J
johnsongreggSep 5, 2025
What to do if Brother Printer barcodes cannot be read?
- S
  Steven ColemanSep 6, 2025
  If printed barcodes cannot be read by a scanner when using your Brother printer, try the following: * Align the label with the print head. * Try using another scanner. * Print the barcodes with the Quality options set to Give priority to print speed.
M
Michael MillerSep 8, 2025
What to do if Brother Printer repeatedly pauses when printing via USB?
- A
  anthonygilbertSep 8, 2025
  If your Brother printer repeatedly pauses and then continues printing when printing via the USB cable, set the print mode to buffered printing.
J
jacob11Sep 12, 2025
What to do if the computer program should be sending data to the Brother Printer, but the POWER indicator does not blink green?
- J
  Jason GillSep 12, 2025
  If the computer program should be sending data to the printer, but the POWER indicator does not blink green, make sure that the USB cable is connected firmly and correctly. Try using another USB cable. If it is not, check the connection.

Brother RJ-4030 Specifications

General

Type	Mobile printer
Maximum resolution	203 x 200 DPI
Flash memory	16 MB
RAM capacity	32 GB
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, EAN13, EAN8, Interleaved 2/5, MaxiCode, PDF417, POSTNET, UPC-A, UPC-E
Product color	Black
Maximum printing width	104 mm
Bluetooth	Yes
Bluetooth version	2.0+EDR
Serial ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Parallel ports quantity	0
Wi-Fi	No
Dimensions (WxDxH)	162 x 176 x 77 mm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Harmonized System (HS) code	84433210