Brother VX710 - Clearance Between Needle and Hook Point

3 - 1. Clearance between needle and hook point
VX511, VX541, VX561, VX581
VX611, VX641, VX661, VX681
VX710, VX720, VX740, VX760, VX780
Before adjustment: Set the stitch width regulator at 0.
Note: When you adjusted this item, check item 4-1.
3 - 2. Clearance between needle and hook point
VX516, VX546, VX566, VX586
VX616, VX646, VX666, VX686
Note: When you adjusted this item, check item 4 - 2.