13-1. Centering of the needle
13-2. Centering of the needle
14. Position of feed cam
VX710
VX511, VX541, VX561, VX581, VX516, VX546
VX566, VX586, VX611, VX641, VX661, VX681
VX616, VX646, VX666, VX686, VX720, VX740
VX760, VX780
VX511, VX541, VX561, VX581, VX516, VX546
VX566, VX586, VX611, VX641, VX661, VX681
VX616, VX646, VX666, VX686, VX710, VX720
VX740, VX760, VX780
Before adjustment: Set the stitch width regulator at "0".
o o
To Next Page
Loading...
