Need help?Do you have a question about the Browning Specops Series BTC-8FHD and is the answer not in the manual?
General| Brand | Browning |
|---|---|
| Model | Specops Series BTC-8FHD |
| Category | Scouting Camera |
| Language | English |
Insert batteries and SD card into the camera for basic operation.
Configure the camera's internal clock and calendar settings.
Camera enters a ready state after a short countdown for image capture.
Lists all items included in the trail camera package.
Explains the invisible flash LEDs for covert night illumination.
Provides guidance on choosing the right SDHC card size for your needs.
Adjust image resolution from 2MP to 10MP.
Set the 'timeout' or delay between captured images or videos.
Customize a name for your trail camera for easier identification.
Choose display units for temperature (Fahrenheit or Celsius).
Use the motion test feature to help aim the camera at the target area.
Enable or disable the information bar printed on each photo.
Resets all camera settings to their factory default values.
Erase all images and reformat the SD card for fresh use.
Adjust the TV signal output format (NTSC or PAL).
Instructions for updating the camera's firmware via the website.
Detailed technical data including resolution, memory, field of view, and power requirements.
Table showing storage capacity for photos, videos, and timelapse on different SD card sizes.
To Next Page
