To Next PageTo Next Page
Need help?Do you have a question about the BRP Can-Am Spyder RS 2011 Series and is the answer not in the manual?
General| Engine Type | Rotax 998cc V-twin |
|---|---|
| Transmission | 5-speed manual |
| Fuel Capacity | 6.6 gallons |
| Front Suspension | Double A-arm with anti-roll bar |
| Tires Rear | 225/50 R15 |
| Fuel System | Electronic Fuel Injection |
| Horsepower | 106 hp |
| Torque | 77 lb-ft |
| Dry Weight | 697 lb (316 kg) |
| Seat Height | 29.5 in (750 mm) |
| Rear Suspension | Swingarm |
| Rear Brake | Disc brakes |
| Tires Front | 165/ R14 |
Safely remove the vehicle's protective crate cover.
Steps to remove the internal sub-crate containing vehicle components.
Verify all included items are present in the front storage compartment.
Procedure for safely extracting the vehicle from its shipping crate base.
Instructions for installing and charging the vehicle's battery before delivery.
Procedure for correctly mounting the vehicle's front wheels.
Setting the recommended cold tire pressure for optimal performance.
Steps to install the front storage compartment assembly.
Procedure for installing the Ambient Air Pressure and Temperature Sensor.
Connecting the vehicle's horn and routing its cable.
Inserting the diagnostic link cable into its housing for service.
Checking and installing the mudguards in the correct positions.
Attaching and securing the hood latch release cable assembly.
Steps to install the front fender assemblies onto the vehicle.
Procedure for connecting and installing the rear fender components.
Replacing low beam headlights for left-hand traffic countries.
Understanding the vehicle's safety labels and hang tag information.
Instructions for installing a license plate with damping pads.
Guidance on installing optional accessories per their instructions.
Instructions for applying vehicle decals according to local regulations.
General guidance on checking and topping up vehicle fluids.
Instructions for adding fuel and recommended fuel types.
Procedure for checking and adding clutch fluid for SM5 models.
Steps for verifying and topping up the engine coolant level.
Safety precautions and procedure for checking brake fluid levels.
Recommended engine oil and procedure for checking oil level.
Step-by-step guide to accurately check the engine oil level.
Instructions for reinstalling the main body panels onto the vehicle.
Procedure for installing the front panel assemblies onto the vehicle.
General information on factory pre-set adjustments and shop manual reference.
Procedure for checking and adjusting the drive belt tension.
Adjusting the clutch lever position for rider preference.
Adjusting the spring preload for front and rear suspension systems.
Adjusting headlight beam height and aim for optimal visibility.
Using the B.U.D.S. software for vehicle programming and diagnostics.
Programming the customer's name and delivery date into the vehicle system.
Resetting trip hours and distance data using the B.U.D.S. tool.
Resetting the last service reminder in the vehicle's maintenance log.
Changing the speedometer units between miles and kilometers.
Properly concluding a B.U.D.S. session and clearing any active faults.
Verifying proper assembly of various vehicle components.
Configuring the vehicle's digital display units and clock.
Performing a test ride to verify all systems function correctly.
Proper methods for cleaning the vehicle's exterior and components.
Completing the delivery checklist and customer handover process.
