To Next PageTo Next Page
Need help?Do you have a question about the BRP Can-Am Spyder RS SE5 2011 and is the answer not in the manual?
General| Displacement | 998 cc |
|---|---|
| Front Suspension | Double A-arm with anti-roll bar |
| Rear Suspension | Swing arm with monoshock |
| Engine Type | Rotax 991 V-Twin |
| Power | 106 hp @ 8500 rpm |
| Torque | 77 lb-ft @ 6250 rpm |
| Transmission | 5-speed semi-automatic (SE5) |
| Fuel System | Electronic Fuel Injection (EFI) |
| Fuel Capacity | 6.6 gal (25 l) |
| Rear Brake | Disc brake |
| Tires Rear | MC 225/50 R15 |
| Colors | Black |
| Tires Front | 165/65-R14 |
| Length | 105.1 inches (2670 mm) |
Critical warnings regarding warranty, torque specifications, and mandatory safety procedures.
Safely extracting the vehicle from the crate base after cutting securing straps.
Steps for installing front wheels, including torque and rotation direction.
Guidelines for checking and inflating tires to recommended cold pressure.
Procedure for removing, charging, and installing the vehicle battery.
Procedures for mounting front fenders, securing harness brackets, and routing hoses.
Steps for connecting the rear brake light harness and installing the rear fender.
Procedures for adding fuel and specifications for recommended fuel types.
Warnings for brake fluid contact and instructions for level checks.
Recommends specific oil types and outlines the verification procedure.
Procedure for verifying drive belt tension using a specialized meter.
Guidelines and warnings for adjusting front and rear suspension spring preload.
Detailed steps for adjusting headlight beam height for various models.
Procedures for vehicle configuration and diagnostics using B.U.D.S. software.
Steps for testing all vehicle systems and components for proper operation.
