EasyManua.ls Logo

BRP Evinrude E-TEC 60 - Page 31

BRP Evinrude E-TEC 60
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Operation
Fuel Economy
Fuel economy can vary depending on boat
load, hull design, and throttle setting. When
boat reaches top speed, throttle back from
FULL SPEED to a lower throttle setting. You
will save fuel with a minimal loss of speed.
Adjustments
Throttle Friction
Adjust the throttle friction knob to reduce the
effort required to hold a throttle setting.
Tiller Handle Angle
Tiller handle angle can be raised or lowered
by turning the adjustment screw under the
handle.
Trim/Tilt Switch
If equipped, the trim/tilt switch is located in the
end of tiller handle. Press switch as indicated
for UP and DOWN operation.
WARNING
Tighten knob only enough to hold throt-
tle at a constant engine speed. Over
tightening will prevent quick throttle
change in case of emergency.
1. Throttle friction screw
005099
1
1. Adjustment screw
005108
1. Trim/tilt switch UP
2. Trim/tilt switch DOWN
005107
1
1
2

Table of Contents

Related product manuals