BRP Evinrude E-TEC G2 User Manual

27
4. Stop filling immediately when the
automatic shut-off feature of the
gas pump handle activates.
5. Wait a moment before removing
the gas pump nozzle from the filler
neck. Do not retract the gas pump
nozzle from the filler neck to top off
the fuel tank.
6. Install the fuel tank cap and turn
clockwise to fully tighten it.
IInn tthhee WWaatteerr
1. Turn off the engine.
2. Tie the boat securely to the fueling
pier.
3. Do not allow anyone to remain in
or on the boat.
4. Have a fire extinguisher close at
hand.
5. Slowly turn the fuel tank cap coun-
terclockwise to fully tighten.
6. Insert the gas pump nozzle into
the filler neck of the fuel tank and
fill the fuel tank.
7. Stop filling immediately when the
automatic shut-off feature of the
gas pump handle activates.
8. Wait a moment before removing
the gas pump nozzle from the filler
neck. Do not retract the gas pump
nozzle from the filler neck to top off
the fuel tank.
9. Install fuel tank cap and turn clock-
wise to fully tighten it.
FFuueell AAddddiittiivveess
NNOOTTIICCEE
UUssee ooff ootthheerr ffuueell aaddddiittiivveess ccaann rree--
ssuulltt iinn ppoooorr ppeerrffoorrmmaannccee oorr eennggiinnee
ddaammaaggee..
The only fuel additives approved for
use in your
Evinrude E-TEC outboard
are:
–
Evinrude 2+4 Fuel Conditioner®
–
Evinrude Fuel System Cleaner
Evinrude 2 +4 Fuel Conditioner will
help pre-vent gum and varnish depos-
its from forming in fuel system compo-
nents and will remove moisture from
the fuel system. It can be used
continuously and should be used dur-
ing any period when the outboard is
not being operated on a regular basis.
Its use will reduce spark plug fouling,
fuel system icing, and fuel system
component deterioration.
Evinrude Fuel System Cleaner will
help keep fuel injectors in optimal op-
erating condition.
FFuueell SSyysstteemm PPrriimmiinngg
If the outboard is run out of fuel, refill
the fuel tank. Turn the key switch to
the ON position to activate the fuel
pump.
2–STROKE ENGINE OIL REQUIREMENTS

BRP Evinrude E-TEC G2 Specifications

General

Brand	BRP
Model	Evinrude E-TEC G2
Category	Outboard Motor
Language	English