EasyManua.ls Logo

BRP Evinrude E-TEC G2 - Page 34

BRP Evinrude E-TEC G2
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
NEUTRAL
REVERSE
REVERSE
FORWARD
FORWARD
BBiinnnnaaccllee MMoouunntt CCoonnttrroollss
Move the control handle with a firm,
quick motion, forward or aft until it en-
gages the forward or reverse gear
detent.
NEUTRAL
REVERSE
REVERSE
FORWARD
FORWARD
FFuueell EEccoonnoommyy
Fuel economy can vary depending on
boat load, hull design, and throttle set-
ting. When boat reaches top speed,
throttle back from FULL SPEED to a
lower throttle setting. You can save
fuel with a minimal loss of speed.
If equipped, use the “fuel economy”
feature of digital displays or gauges to
optimize fuel consumption. Refer to
the user’s guide for the digital display.
1 2
TTYYPPIICCAALL FFUUEELL EECCOONNOOMMYY TTHHRROOTTTTLLEE
RRAANNGGEE
1. Side mount control
2. Binnacle mount control
PPoowweerr TTrriimm aanndd TTiilltt
The trim and tilt functions of
Evinrude
E-TEC
outboards are controlled by
the engine
EMM
.
IIMMPPOORRTTAANNTT:: Activating any trim
button while the key switch is in the
OFF position will briefly turn on the
system. This will cause the electric
fuel pump to run and the remote con-
trol and any displays or gauges to turn
on. There will be a short delay before
the trim system operates. This is
OPERATION

Other manuals for BRP Evinrude E-TEC G2

Related product manuals