EasyManua.ls Logo

BRP Evinrude E-TEC G2 - Page 74

BRP Evinrude E-TEC G2
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
3. The following parts are considered emission-related components for
evaporative emissions:
Fuel tank
Fuel cap
Fuel line
Fuel line fittings
Clamps*
Pressure relief valves*
Control valves*
Control solenoids*
Electronic controls*
Vacuum control diaphragms*
Control cables*
Control linkages*
Purge valves
Vapor hoses
Liquid/vapor separator
Carbon canister
Canister mounting brackets
Carburetor purge port connector
4. Emission-related components also include any other part whose only
purpose is to reduce emissions or whose failure will increase emissions
without significantly degrading engine/equipment performance.
*As related to the evaporative emission control system
LLiimmiitteedd AApppplliiccaabbiilliittyy
As a certifying manufacturer, BRP may deny emission-related warranty claims
for failures that have been caused by the owner's or operator's improper mainte-
nance or use, by accidents for which the manufacturer has no responsibility, or
by acts of God. For example, an emission-related warranty claim need not be
honored for failures that have been directly caused by the operator's abuse of
the engine/equipment or the operator's use of the engine/equipment in a manner
for which it was not designed and are not attributable to the manufacturer in
anyway.
SPECIFICATIONS115, 135 HP(IN-LINE 3 CYLINDER, 1.7 LITER) MODELS

Other manuals for BRP Evinrude E-TEC G2

Related product manuals