79
FFrreeqquueennttllyy AAsskkeedd QQuueessttiioonnss
No dealer-scheduled maintenance for five years or 500 hours of normal recrea-
tional use? Really?
– Yes! BRP knows you want to spend your time out on the water, not servicing
your
Evinrude E-TEC
outboard. There are no valves to adjust, belts to serv-
ice, chains to replace, or oil to change. We do recommend pre-launch inspec-
tions of your outboard at each use and at regular intervals. Salt water
applications require minimal additional inspections and lubrication.
What fuel octane is recommended for my Evinrude E-TEC outboard?
–
Evinrude E-TEC
outboards require a minimum octane rating 87 {AKI (R+M)/
2} in the U.S. and Canada, or 90 {RON} outside of the U.S. and Canada. Use
of higher octane fuels is not harmful, but also not necessary.
What kind of oil does my Evinrude E-TEC outboard require?
–
Evinrude XD100
Direct Injection 2–Stroke Oil is recommended for your
Evin-
rude E-TEC
outboard. When operating in conditions under 32°F (0°C),
Evin-
rude XD100
oil must be used.
Do I need to mix oil into my fuel?
– NNoo.
Evinrude E-TEC
outboards do not require any mixing of oil and fuel.
Can I order replacement parts and accessories for my Evinrude E-TEC
outboard?
– Yes. When replacement parts are required, use
Evinrude
Genuine Parts or
parts with equivalent characteristics, including type, strength, and material.
Using substandard parts could result in injury or product malfunction. Your
dealer can order the parts and accessories you desire.
Do I need to complete any paperwork when I move or sell my Evinrude E-TEC
outboard?
– Yes. In order to maintain contact with you or the new
Evinrude E-TEC
owner,
BRP requests you complete the form outlining CChhaannggee ooff AAddddrreessss // CChhaannggee
ooff OOwwnneerrsshhiipp. This will ensure you or the new owner is made aware of any
product announcements and keep the warranty coverage up-to-date.
What do I need to do before storing my Evinrude E-TEC outboard for the winter?
– Winterization is minimal. Refer to
STORAGE
for step-by-step instructions to
store your
Evinrude E-TEC
outboard for the off-season.
CChhaannggee ooff AAddddrreessss//OOwwnneerrsshhiipp
If your address has changed or if there has been a change of ownership, be sure
to fill out and mail the form provided on this page.
This notification is necessary for your own safety even after expiration of the orig-
inal warranty, since BRP will be in a position to contact you if correction to your
outboard is required. Outside the U.S. and Canada, this card should be sent to
the Bombardier Recreational Products division where the outboard was regis-
tered. Please contact your Dealer or Distributor.
SPECIFICATIONS115, 135 HP(IN-LINE 3 CYLINDER, 1.7 LITER) MODELS
To Next Page
Loading...
