BRP ROTAX 912 Series Service Bulletin

d06856.fm
SB-912-074 / SB-914-056
SERVICE BULLETIN
03 December 2020 73-00-00
Initial Issue Page 5 of 12
Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
2) Material Information
2.1) Material
Price and availability will be provided on request by ROTAX
®
Authorized Distributors or their inde-
pendent Service Centers.
2.2) Company support information
- Any possible support by BRP-Rotax will be provided on request by ROTAX
®
Authorized Dis-
tributors or their independent Service Centers
- Exchanged parts must be returned FCA (Free CArrier) to ROTAX
®
Authorized Distributors or
their independent Service Centers
- This exchange program and cost sharing is valid until December 1
st
2021. Up to this date lim-
ited reimbursement of costs can be applied for
- Shipping costs, downtime costs, loss of income, telephone costs etc. or costs of conversion to
other engine versions or additional work, as for instance simultaneous engine overhauls are
not covered in this scope and will not be borne or reimbursed by ROTAX
®
2.3) Material requirement per engine
Parts requirement for exchanging the floats and for restoring the initial configuration:
NOTE: Use only parts indicated in the following table:
2.4) Material requirement per spare part
None.
2.5) Rework of parts
None.
2.6) Special tooling/lubricants- /adhesives- /sealing compounds
None.
New
part no.
Qty/
engine
Description
Old
part no.
Application
861189 2 Float (pair), guided 861185 and
861188
Engine types 912/914 Series
830721 2 Gasket Float chamber 912/914 Series
830722 2 Gasket Float chamber 2- stroke Series
631771 2 O-ring 15.6x1.78 For Engine Type 914 only:
Attachment screw

BRP ROTAX 912 Series Specifications

General

Brand	BRP
Model	ROTAX 912 Series
Category	Engine
Language	English