BRUEL & KJAER 2203 - Tripod Mounting Threads

AMPLIFIER OUTPUT:
TRIPOD-MOUNTING THREADS:
12
The EXTERNAL FILTER IN and OUT sockets may be connected to a
1
61 3 or a 1 61 6 directly by means of the Connections Bar JP 0400
supplied with each filter.
This socket provides an AC output of 3,1 6 V RMS at full-scale meter
needle deflection. The maximum output voltage is 16 V peak into a
load impedance of at least 1 0 kO. It may be used for connection to a
Level Recorder or Tape Recorder. Accepts plug JP 0006 or cable AO
0007, etc ..
There are two tripod-mounting threads on the rear of the 2203. The
upper thread is
for mounting of the 2203 alone, while the lower
thread is for mounting of the 2203 when fitted with a filter set (Type
1
61 3 or 161 6). For vertical mounting, a thread is also provided on the
battery cover on the bottom of the 2203.