Need help?Do you have a question about the BRUEL & KJAER NEXUS 2690 and is the answer not in the manual?
General| Input Channels | 1 |
|---|---|
| Input Connector | BNC |
| Output Connector | BNC |
| Weight | 1.2 kg |
| Type | Preamplifier |
| Frequency Range | 0.1 Hz to 200 kHz |
| Common Mode Rejection Ratio | > 100 dB (DC to 10 kHz) |
Explains safety symbols and associated warnings in the manual.
Specifies that the apparatus is not for explosive environments.
Crucial safety warnings for operation and maintenance.
Document revision tracking and identification.
Safety requirements and precautions for operating the instrument.
Details on hardware and software version identification.
Information on repair, exchange, and spare parts.
Procedures and types of calibration and testing services.
Lists necessary tools for checking and adjustment.
Description of controls and indicators on the front of the unit.
Details of connectors and ports on the rear of the unit.
Guidelines for EMC compliance and ferrite clamp usage.
Information on updates and changes released via Service Notes.
Overview of checking procedures and modes.
Instructions for running the built-in digital self-test.
Guidance on manually checking analogue circuitry.
Detailed checks for charge input channels.
Procedures for microphone and sound intensity channels.
Procedures for DeltaTron input channels.
Checks for optional integration filters.
Procedures for weighting filters.
Steps to remove the display unit from the casing.
Instructions for removing the main motherboard.
Procedure for removing individual input/output channels.
Steps to remove the main processor board.
Procedure for removing the rear circuit board.
User guide for ATAC calibration software for servicing NEXUS.
Overview of the ATAC software main menu options.
Accessing service functions like adjustment and correction.
Required connections for ATAC system setup.
Measuring and downloading channel correction factors.
Measuring and adjusting polarization voltage.
Manual adjustment of frequency response via potentiometers.
Configuring channel types and AUX modules.
To Next Page
