BRUEL & KJAER 6302 User Manual

Instruction Manual
Waveform Retriever Type 6302
--
-. ::-
J.
03~0254
6302
A battery operated instrument used to ex-
tract periodic waveforms from noisy and
complex signals . Produces a low-frequency
duplicate of the original waveform with cor-
rect amplitude and phase relationships,
which can be plotted on a Level Recorder or
X-Y recorder. The instrument delivers sig-
nals for synchronizing the B & K Level Re-
corders Types 2306 and 2307, allowing
easy reading of phase angle throughout the
signal period. Input range is ± 7 V peak, DC
to 10kHz.
+ Bri.iel & Kjmr

BRUEL & KJAER 6302 Specifications

General

Brand	BRUEL & KJAER
Model	6302
Category	Amplifier
Language	English

Summary

Waveform Retriever Introduction

Key Features and Applications

Highlights the main features and typical uses of the Type 6302 instrument.

Principle of Operation

Explains the core concept of extracting periodic waveforms using sampling and filtering.

Technical Specifications

6302 Instrument Specifications

Detailed technical specifications covering input, output, power, and environmental parameters.

Instrument Controls and Interfaces

Description and Block Diagram

Details the instrument's overall design, block diagram, and channel characteristics.

Front Panel Controls

Comprehensive guide to controls on the front panel, including trigger and signal processing.

Rear Panel Connectors

Description of rear panel connections for power, signal output, and external trigger input.

Operation and Signal Processing

Power Supply Options

Guidance on powering the instrument via batteries, external DC, or mains adapters.

Parameter Selection for Recording

How to select sweep period and filter bandwidth for effective signal capture.

Operation with Level Recorders

Procedures for connecting and operating with Level Recorder Types 2306 and 2307.

Operation with X-Y Recorder

Methods for connecting and using the 6302 with an X-Y recorder for data acquisition.

Output Signal Spectrum Analysis

Mathematical analysis of the output signal's frequency spectrum after sampling.

Noise Filtering Techniques

Explanation of how internal filters reduce broadband noise in the output signal.